How To Configure And Reset D-Link Dwr-111 Router. Hold paper clip down for 10 seconds and release. Connect the ethernet cable to the wan (or internet) port of both your modem and router, connecting the two.
DLink Technical Support
(wan ports are normally yellow) step 3: How to change ssid and password of the router? To perform a factory reset, please follow the steps below. 2 reset button press this button with an unfolded paperclip and hold for ten seconds to reset the device. This router is great for situations where an impromptu wireless network must be set up, or wherever conventional network access is unavailable. The unit will reboot automatically. The unit will reboot on its own. Using the paperclip, press and hold the reset button for more than ten seconds. Hold paper clip down for 10 seconds and release. If you have changed the password and cannot remember it, you will need to reset the router to factory defaults.
Click the tools tab at the top, then click the system tab on the left pane. Open your web browser and type in the ip address of the router (192.168.0.1 by default). Hold paper clip down for 10 seconds and release. Ensure that you have connected successfully to the router. Click the tools tab at the top, then click the system tab on the left pane. Give it a moment to start up with a light indication. Connect the included power adapter to a wall socket and your router. (wan ports are normally yellow) step 3: The default ssid and password are printed on the bottom of your router. The unit will reboot automatically. Simply plug it in to create an instant hotspot.
